Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Caller ID from FXO-M1 to IP Phone with CallManager 3.3

I am trying to get the Caller ID recieved from an Analog line connected to a FXO-M1 port on a MRP-300 using 12.3.2xa to show up on an IP Phone that is registered to CallManager 3.3(3) running on the SPE in the same ICS 7750. We recieve the Caller ID on the MRP-300:

*Mar 3 18:45:28.647: [0/0] get_fxo_caller_id calling num=7815551212 calling nam

e=John, Doe calling time=08/25 13:49

On CallManager trace we recieve:

Cisco CallManagerE0063S: Size constraint violated, length of value = 0; check field 'namePresentationAllowedSimple' (type: NameData) of field 'namePresentationAllowed' (type: NamePresentationAllowed) of field 'name' (type: Name) of field 'argument' (type: NameArgument) of field 'callingNameInvoke' (type: CallingNameInvoke) of PDU #1 'CallingNameRose'.**

The phone line from the Telephone company has the Caller ID service and the MRP has the caller-id enable command and the default caller-id unblocked.

  • Other Collaboration Voice and Video Subjects
2 REPLIES
New Member

Re: Caller ID from FXO-M1 to IP Phone with CallManager 3.3

Not sure about the protocol you are using, however, CallerID is NOT supported from FXO using MGCP...

At this time, I have not heard of when it will work.

-Jaret

New Member

Re: Caller ID from FXO-M1 to IP Phone with CallManager 3.3

is inbound callerID supported with FXO if you are using h323?

100
Views
0
Helpful
2
Replies