Caller ID maximum length displayed on IP phone screen
Is there any information for the maximum Caller ID length which can be fully displayed on the IP phone screen? Because if the Caller ID is too long, it can not be fully displayed on the screen and "..." will be display.
I don't want to open an xx-th topic about Caller ID on Cisco, however being this one to be most appropriate while someone's searching for "caller id length" (regarding FXS possibly, also placed under "Other VOIP topic"), I utlilize it to ask this :
Why with default caller-id setup on Cisco VOIP gateway the maximum length is 10 digits only? Can it be adjusted to longer format?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...