The callerinfo sample is available in Java but you've certainly already seen that. Your problem is that you cannot use Java with .NET... so you need to use TAPI instead.
There's a managed TAPI wrapper called ATAPI.NET which has worked for me and made things rather easy to get started. There's one or two samples to help you get started... it takes a bit of tinkering since there aren't too many samples but I managed to get a device / line state tracking application within a day or so.
Of course you also need to port the AXL code to C# but that shouldn't be too hard since Java and C# are very similar.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...