callmanager 3.1(3a) to 3.2(2c) to 3.2.2 SP G Upgrade?
Im going to upgrade a publisher and one subscriber clister from 3.1(3a) to 3.2(2c) then Apply SP G on the servers. My question is should i upgrade the Publisher to 3.2(2c) then the Subsciber to 3.2(2c) then apply SP G to the Publisher and then the Subscriber, or should Upgrade the publisher to 3.2(2c) , let it reboot then upgrade it SP G, then reboot and then upgrade the Subsciber to 3.2(2c) and then SP G ???
Re: callmanager 3.1(3a) to 3.2(2c) to 3.2.2 SP G Upgrade?
I'm planing on doing the same upgrade on a 2 server 7830 Cluster. Any tips or things that I need to watch out for? I'm in the process of cleaning up my CDR database, getting a STI backup, and saving a hard drive for fail back.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...