A client of mine had their administrator password compromised. I looked for a white paper on how to do this but did not find one. I am trying to find the process to change the admin password on a Call manger system and what services also need to be updated.
If your only changing the administrator password and not the DC Directory password, then it is quite simple.
create back door (secondary admin account) )
change the administrator password - as normal
change any Services that use administrator password (taps, Apps Service,etc)
change SQL password
---- SQL enterprise manager > server > server group > local >security > login
----- select properties of "sa" account and change to new password
that's should be all
If changing the DC password - search for "How to Change the DC Directory Password" - however they have missed a couple key points - have worked with TAC on this and are suppose to update this document and possibly issue a bug trac on it.
need to also change passsword in c:\dcdsrvr\DirectoryConfiguration.ini
(note the EMApp - is not used in 3.3, so password is not important in the registry.)
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...