01-20-2009 06:54 PM - edited 03-13-2019 06:00 PM
New to Unified Communication I've been assigned to upgrade our callmanager from 4.1 to 6.1. Is there a way that I can import the phones and data settings while I upgrade so I dont have to import phones and create partitions, search spaces, and all that. Saving that time would be helpful.
thanks in advance,
Mike
Solved! Go to Solution.
01-20-2009 09:16 PM
Hi Mike,
Take a time to read this documentation:
Upgrading to Cisco Unified Communications Manager Release 6.1(1) from Cisco Unified Communications Manager 4.x Releases:
http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/upgrade/6_1_1/upgrd611.html
Data Migration Assistant User Guide Release 6.1(2):
http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/dma/6_1_2/dmaug612.html
CallManager 4.x to 5.x/6.x Upgrade Fails Due to DMA Error:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00807f3307.shtml
Hope this info helps you.
Please rate useful posts.
Best regards,
- Adrián.
01-20-2009 09:16 PM
Hi Mike,
Take a time to read this documentation:
Upgrading to Cisco Unified Communications Manager Release 6.1(1) from Cisco Unified Communications Manager 4.x Releases:
http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/upgrade/6_1_1/upgrd611.html
Data Migration Assistant User Guide Release 6.1(2):
http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/dma/6_1_2/dmaug612.html
CallManager 4.x to 5.x/6.x Upgrade Fails Due to DMA Error:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00807f3307.shtml
Hope this info helps you.
Please rate useful posts.
Best regards,
- Adrián.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide