Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CallManager 4.1 to 6.1 upgrade data import

New to Unified Communication I've been assigned to upgrade our callmanager from 4.1 to 6.1. Is there a way that I can import the phones and data settings while I upgrade so I dont have to import phones and create partitions, search spaces, and all that. Saving that time would be helpful.

thanks in advance,

Mike

1 ACCEPTED SOLUTION

Accepted Solutions

Re: CallManager 4.1 to 6.1 upgrade data import

Hi Mike,

Take a time to read this documentation:

Upgrading to Cisco Unified Communications Manager Release 6.1(1) from Cisco Unified Communications Manager 4.x Releases:

http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/upgrade/6_1_1/upgrd611.html

Data Migration Assistant User Guide Release 6.1(2):

http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/dma/6_1_2/dmaug612.html

CallManager 4.x to 5.x/6.x Upgrade Fails Due to DMA Error:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00807f3307.shtml

Hope this info helps you.

Please rate useful posts.

Best regards,

- Adrián.

1 REPLY

Re: CallManager 4.1 to 6.1 upgrade data import

Hi Mike,

Take a time to read this documentation:

Upgrading to Cisco Unified Communications Manager Release 6.1(1) from Cisco Unified Communications Manager 4.x Releases:

http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/upgrade/6_1_1/upgrd611.html

Data Migration Assistant User Guide Release 6.1(2):

http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/dma/6_1_2/dmaug612.html

CallManager 4.x to 5.x/6.x Upgrade Fails Due to DMA Error:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00807f3307.shtml

Hope this info helps you.

Please rate useful posts.

Best regards,

- Adrián.

260
Views
0
Helpful
1
Replies
CreatePlease to create content