Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CallManager 4;X : PBX Interoperability Tenovis (Bosh) with E1 QSIG

Hi,

Is it possible to connect a Tenovis (Bosh)PBX via a QSIG PRI or IP H323 to a 2800 series router.An experience about that?

Thanks a lot

Cedric

1 REPLY
Bronze

Re: CallManager 4;X : PBX Interoperability Tenovis (Bosh) with E

It looks as though the Tenovis I55 supports both QSIG and H.323; this would make it fairly straight forward to connect to CCM, we have not performed any formal testing on it.

In terms of IOS, I would recommend that you use a mainline IOS such as 12.2(10b) or greater. Usually the higher IOS's are more stable.

337
Views
0
Helpful
1
Replies
CreatePlease to create content