What disk set do you have? We got our Callmanager 5 CDs as SASU upgrade, and they are coming with the Linux installation procedure. When you boot up from the CD, first it installs Linux, and then it runs CallManager installation or upgrade. Our disk DVD disk, named "Cisco Unified CallManager Installation Disk", version 5.0(3a).
Note: The CM5 installation disk is a DVD not a CD.
Back up all of your data using the procedures outlined in the release notes. Place the DVD in a DVD Drive (Duh) and reboot the machine. The Linux should start the install and hardware compatibility check. You will require at least 2GB of RAM and dual 72GB Ultra SCSI drives to install this. Use the CCM Upgrade Assistant Install program 4-2-1.
Lee (needing to add hardware to his MCS 7835 in order to play with this...:< )
If it is a 5.0(4) DVD, then you should automatically be receiving a new one in the mail. We received a 5.0(4) DVD, and I received that same error message. Last week, we received another copy with a letter stating there was an issue in production of the DVD media causing this. The new DVD we received installed OK. I would suggest contacting your account team to get the latest copy if the new one hasn't arrived yet.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...