Are there any automated ways of providing Call Block List services, so that users can not dial a predefined list of number? I know route patters can do this, but to my best estimation It would take about 3 lifetimes to enter 900,000 numbers. And the list is generated every month. Any Ideas?
The list could be re-formatted to a BAT csv relatively easily. Import the DN's as dummy CTI ports with CFA to your internal operator or whatever destiantion you desire. /Wes Give the devices unique names so you can use BAT to delete them and re-insert as appropriate every month.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...