CallManager Express & CiscoIPPhoneExecute (One for the Experts)
Have anyone tried getting Execute command working with CallManager Express? I have a CallManager and a Express version, on my CallManager the CiscoIPPhoneExecute works but not with CME ?
Also, When a IP Phone looses connectivity to CallManager during a phone call it displays the following " CM down, functions disabled " (With the Speakerphone light on) Now, If the Connection is re-established the phone stays in this state. If I press the Speaker button it returns to Idle state. How can I do this remotely or is there a timeout that I can Increase or Decrease.
Even on CallManager if I try to Execute the Key:Speaker when the phone is in this state it comes back with IPPhoneError 6. In this state the Web-Server is still running and it still Authenticates me.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...