I have a local PSTN connection terminated on the CCME through E1 PRI link.I have one more router for WAN link connected to a remote site where a CallManager cluster is located.
I want to register 7940 phones with CCME with two lines, one line for making PSTN calls & other for making calls to remote CCM cluster.The two lines should be totally seperated(different partitions) & should not be able to call each other.
ie using the first line I should not be able to make any voip calls & through second line I should not be able to make any local PSTN calls.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...