cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
254
Views
0
Helpful
3
Replies

CallManager sends too many trafic

ivedernikov
Level 1
Level 1

Hi all, I see so picture:

5 minute input rate 3716000 bits/sec, 2170 packets/sec

5 minute output rate 265000 bits/sec, 224 packets/sec

eb 19 13:59:16: IP: s=10.0.0.23 (FastEthernet0/0), d=195.222.149.14 (FastEthernet0/0), len 200, rcvd 3

Feb 19 13:59:16: UDP src=24802, dst=19048

CCM sends pacets to router. Ports always different...

Why? Anybody knows?

sorry for my English...

3 Replies 3

The problem is configuration from your Call Manager. I have CCM 3.3 and CCM Publisher send many packets to Gateway (router) to different ports. Solutions ? make ACL and lock ports. But you have check the configuration from your CCM. If you speak spanish call me, (228) 8420530 Veracruz, México.

MARTIN STREULE
Spotlight
Spotlight

My guess is that you have MTP enabled in the CCM gateway configuration.

Ports look like UDP/RTP....

Martin

pbarman
Level 5
Level 5

Ports sure look like UDP/RTP. CallManager will generate such packets when you have MOH configured on the CallManager, and/or when the CallManager is a software conference bridge for g711 participants.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: