Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

CallManager sends too many trafic

Hi all, I see so picture:

5 minute input rate 3716000 bits/sec, 2170 packets/sec

5 minute output rate 265000 bits/sec, 224 packets/sec

eb 19 13:59:16: IP: s=10.0.0.23 (FastEthernet0/0), d=195.222.149.14 (FastEthernet0/0), len 200, rcvd 3

Feb 19 13:59:16: UDP src=24802, dst=19048

CCM sends pacets to router. Ports always different...

Why? Anybody knows?

sorry for my English...

3 REPLIES
Community Member

Re: CallManager sends too many trafic

The problem is configuration from your Call Manager. I have CCM 3.3 and CCM Publisher send many packets to Gateway (router) to different ports. Solutions ? make ACL and lock ports. But you have check the configuration from your CCM. If you speak spanish call me, (228) 8420530 Veracruz, México.

Re: CallManager sends too many trafic

My guess is that you have MTP enabled in the CCM gateway configuration.

Ports look like UDP/RTP....

Martin

Silver

Re: CallManager sends too many trafic

Ports sure look like UDP/RTP. CallManager will generate such packets when you have MOH configured on the CallManager, and/or when the CallManager is a software conference bridge for g711 participants.

94
Views
0
Helpful
3
Replies
CreatePlease to create content