Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CallManager using Audix VM via SMDI and analog

Hello all,

Can anyone comment on integrating CM 3.1 into an existing Audix VM that the customer wants to use.

I'm assuming I'll need to use an SMDI interface but

wondering what type of analog interface would be needed (FXS, FXO, E&M).

Has anyone done this?

Thanks

Scott

2 REPLIES
New Member

Re: CallManager using Audix VM via SMDI and analog

Depends on how many ports you need. The 7630dpa will work with the Audix as well as the Octel 250/350. The Cisco VG248 gateway is also an option. You can get some info from cisco.com on this product.

Re: CallManager using Audix VM via SMDI and analog

Scott,

I don't think you have much choice here really. What does the AUDIX already have installed, that's what you'll need. It would probably cost as much to replace the ports on the Audix for another type and then the relevant Cisco ports, as it would to install UNITY and get better integration (and support).

If the customer wants to stick with Audix (and other than for cost reasons I can't think why), then ask them what ports it's got on it and quote them those type.

Paul

266
Views
0
Helpful
2
Replies