Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

CalManager SNMP RouteList Exhaust traps

I'm getting a lot of Route List Exhaust and Media route list Exhaust traps on my monitoring station (NetIQ). But there are no errors in the Event Viewer. Where can I see what Rout Lists are being exhausted. How do I troubleshoot this problem? Also, is it a problem and can/should I turn it off? Note: the link to snmpboy.msft is not working.

2 REPLIES
Cisco Employee

Re: CalManager SNMP RouteList Exhaust traps

Take a look in you callmanager debugs to see why the routelist is exhausted. Normally this is becasue the gateways in the associatted group are either down or you have run out of gateways.

Look at the ccm trace on the node that sent the message aeound the time the problem occoured.

You should be able to search the trace file for the message routelist exhuasted.

Neal

Re: CalManager SNMP RouteList Exhaust traps

Will the trace say "routelist exhausted," just like the snmp trap? Or will it say something else? I've have had several NetIQ alarms for routelist exhausted but when I go in to the trace, I can't find the word exhausted. The traces are set to detailed. What is a good keyword to search through several megabytes of text for this?

131
Views
0
Helpful
2
Replies