Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Can someone identify what's happening in this section of my debug...

This is a portion of a "debug voip ccapi inout" from a working vg200 connected to a Nortel PBX....

2d11h: cc_api_call_setup_ind (vdbPtr=0x8136BCC4, callInfo= called=918473232893,called_oct3=0x80,calling=6995,calling_oct3=0x0,calling_oct3a=0x81,calling_xlated=false,subscriber_type_str=Unknown,fdest=1,peer_tag=249, prog_ind=0,callingIE_present 1},callID=0x817514A4)

2d11h: cc_api_call_setup_ind type 0 , prot 1

2d11h: cc_api_call_setup_ind (vdbPtr=0x8136BCC4, callInfo={called=918473232893, calling=6995, fdest=1 peer_tag=249}, callID=0x817514A4)

###################################################

2d11h: cc_insert_call_entry: Increment call volume counter

2d11h: cc_insert_call_entry: current call volume: 7

2d11h: cc_insert_call_entry: entry's incoming TRUE. is_incoming is FALSE

2d11h: cc_incr_if_call_volume: remote IP is 10.55.42.19

2d11h: cc_incr_if_call_volume: hwidb is FastEthernet0/0

2d11h: cc_incr_if_call_volume: added for entry: 7, voip: 7, mmoip: 0

###################################################

2d11h: cc_process_call_setup_ind (event=0x81402A08)

2d11h: >>>>CCAPI handed cid 4755 with tag 249 to app "DEFAULT"

I'm comparing it with a debug from another vg200 (configured identically: IOS, running config, hardware) attached to that same Nortel PBX. The section between the pound signs is the only thing missing from the non-functioning debug. I'm thinking it's a PBX issue. I just want more ammo to support my findings.

1 REPLY
New Member

Re: Can someone identify what's happening in this section of my

Check the following link for the debug information on end to end VOIP signalling

debug voip ccapi inout

http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a0080094045.shtml#voipccapi

85
Views
0
Helpful
1
Replies
CreatePlease to create content