Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cannot conference inbound calls through H.323 g/w

We can conference (internal) ip phone calls all day and can conference calls through the h.323 gateway if both calls are outbound. But if we try to conference an inbound call with any other kind of call (inbound/outbound/ip phone) the first caller has one-way audio. The conference can hear him but he can't hear anything. All subsequent conference participants can hear everything fine, it's just the first caller.

CCM version is 3.1(3a) w/spF and es27. Phones are 7940/60 w/load of P00303010403.

Has anyone else had this problem, or does anyone have a hint as to what I should be looking for? Any and all help is most appreciated.

2 REPLIES
New Member

Re: Cannot conference inbound calls through H.323 g/w

Hi,

The problem you encountered is pretty unusual. Anyway, what codec did define in your voip dial-peer for your voice gateways? In any normal situation, only G711ulaw is supported for conferencing. Just check the codec and probably the regions define in your CCM.

Regards,

Sherwin

New Member

Re: Cannot conference inbound calls through H.323 g/w

Yes, it is unusual...unfortunately it is one of several "unusual" problems with our installation. (arggghh!)

Anyway to answer your questions: we are using G.711uLaw everywhere on our network including all dial peers on our gateway. We do not use regions as we are a one-office deployment.

130
Views
0
Helpful
2
Replies
CreatePlease to create content