02-25-2003 05:28 AM - edited 03-12-2019 10:49 PM
Does VWIC-1MFT-E1 with NM-HDV support CAS ? Can this be used for voice-only applications i.e. to connect to a PABX etc. over CAS.
02-25-2003 07:33 AM
Yes
02-25-2003 08:56 PM
I have been trying to connect a 3640 having VWIC-1MFT-E1 to a Nortel Meridian 61C, but it is not working. The interface on Nortel Meridian is a DTI interface that supports CAS. The E1 port comes up, but no calls are forwarded as there are some errors in the exchange of channel signalling parameters.
Can you suggest some example/ sample configuration for this scenario
thanx for getting back
09-18-2003 02:16 PM
Athar,
Did you ever get this to work ?
I am trying to do something similar.
Phil
09-21-2003 07:35 PM
Depends on what the defination of CAS is. We support E1 R2, which is the most common form of E1 CAS, but we can handle other variants such as wink start and immediate start. We can also customise the implementation with voice port command such as 'define tx-bits idle XXXX', 'define tx-bits seize XXXX', 'define rx-bits idle XXXX' and 'define rx-bits seize XXXX'
Depends on what the PBX is providing - give us more information on what it wants and we can probably do it.
09-21-2003 07:52 PM
I had an issue with a CAS integration to an NEC and after many weeks of agony came to realize that the NEC needed feature group b (e&m -fgb) support. fgb at the time was only supported on the AS5300.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide