Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Bronze

catalyst 500 POE cable pinouts

I read that the catalyst 500 supports both 802.3af and cisco pre-standard but I need to verify which cable pins the catalyst 500 is using to power a Cisco Phone.

I assume it will be either 1, 2, 3, 6 or 4, 5, 7, 8.

1 REPLY
Hall of Fame Super Red

Re: catalyst 500 POE cable pinouts

Hi Shane,

Here is a reference guide for the Catalyst 500 which shows that the pins being used are 1,2,3,6 as you suggested.

User Guide for the Catalyst Express 500 Switches

From this doc;

http://www.cisco.com/en/US/products/ps6545/products_user_guide_chapter09186a0080531d83.html#wp1007834

Hope this helps!

Rob

Please remember to rate helpful posts........

380
Views
5
Helpful
1
Replies