We're moving from a PRI to a provider that offers SIP. I know nothing of SIP or Gatekeeper. The call flow will be CCM -> 2651XM -> PSTN via SIP. I've been testing with the IP2IP IOS and a SIP softphone. I can make the softphone ring the 7960 but no audio. I haven't been able to find any sample configs that show h323 to sip conversion so I'm not sure if I'm on the right path. This is what I have so far: CCM 3.3 with and H323 trunk -> IP2IP gateway -> SIP softphone Could someone set me on the right path. Thanks in advance
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...