Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

CCM 4.1(3)SR3 pulled from CCO?

The CallManager upgrade to 4.1(3)SR3 has been pulled from CCO. There doesn't appear to be any notes as to why, anyone know the reason?

Andy

14 REPLIES
New Member

Re: CCM 4.1(3)SR3 pulled from CCO?

ya, how come pulled from CCO? i want to ask also this questions . As we know it meant to solve the

CSCsc37302 Locations Bandwidth Leak

CSCsb46742 Bandwidth leakage allocation in CCM

CSCsb08295 cdcc leak, locations bandwidth not released

The version you are running 4.1(3) doesn't contain the fix for these.

Anyone know? When's it RELEASED?

New Member

Re: CCM 4.1(3)SR3 pulled from CCO?

It's very strange that they pulled it without saying why they pulled it. I'm sure lots of people downloaded it and are using it. They would probably like to know why the release they're running was taken down from CCO so quickly. It must have been because someone found something very wrong with it. The lack of any notes on CCO about this is odd.

Green

Re: CCM 4.1(3)SR3 pulled from CCO?

Expect SR3a next week.

Re: CCM 4.1(3)SR3 pulled from CCO?

Can you provide the specific bugs that resulted in it being pulled? I have sr3 running on a lab system and am curious.

Re: CCM 4.1(3)SR3 pulled from CCO?

There was a build issue discovered with 4.1(3)sr3 and as a result has been removed from CCO. The BU is currently working on a replacement 4.1(3)sr3a. This build for the replacement SR could be ready over the weekend and will be posted as soon as it is available.

New Member

Re: CCM 4.1(3)SR3 pulled from CCO?

Jorge,

Could this build issue have been related to "Voice Mail Port Wizard" not working? We are installing a new server using 4.1(3)SR3, and have attempted to insall the voiecemail ports using the wizard several times now, and everytime, the browers says "validating..." at the corner of the window, and it just sits there forever, and the window becomes useless eventually. A reboot of the server didn't make any difference.

Anybody else has seen this symptom?

Thanks,

Joseph

Green

Re: CCM 4.1(3)SR3 pulled from CCO?

Thanks for the input Joseph,

working with Jorge we have just replicate it in our lab.

Will let u know, looks like a new DDTS ,will do research about it.

//g

Green

Re: CCM 4.1(3)SR3 pulled from CCO?

Restart IIS.

Once u r in the CCMAdmin webpage in status validating...

Leave it there for a minute then hit back...

You will be in the Line group Option now.

This is a WA only

Will let u know

New Member

Re: CCM 4.1(3)SR3 pulled from CCO?

Thanks for looking into it. In light of what's going on with SR3, I have downgraded our servers to SR2. The VM port wizard worked without any problems. Will look for (a more stable) SR3a :-)

Thanks,

Joseph

Re: CCM 4.1(3)SR3 pulled from CCO?

Lesson of the day.

Wait for a few days before applying patches (as soon as they come out). Unless its a heavy requirement to fix some bugs that affect your day to day operation.

Sankar.

New Member

Re: CCM 4.1(3)SR3 pulled from CCO?

SR3a is now posted.

Curiously it only has one bug fix (DMS100 related) over the previous SR3.

Maybe is was considered serious enough to pull the previous SR.

Green

Re: CCM 4.1(3)SR3 pulled from CCO?

Hi Joseph,

Tested VM port wizard with SR3a still the same problem with as expected...

Re: CCM 4.1(3)SR3 pulled from CCO?

Jess,

gogasca and I have just opened DDTS CSCsd59949 for this issue, you can track it down with the bug tool:

http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl

Thanks for the feedback...

Re: CCM 4.1(3)SR3 pulled from CCO?

That is correct, SR3a was only to fix CSCsd54037: Notification Indicator Mandatory IE Missing in DMS NOTFIY message.

It was posted yesterday before midnight and you can find it at this URL:

http://www.cisco.com/cgi-bin/tablebuild.pl/callmgr-41

gogasca and I will continue testing the problem with the VM Port wizard.

142
Views
0
Helpful
14
Replies
CreatePlease to create content