Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CCM Admin Web page "Page cannot be displayed"

Recently, my Call Manager box was upgraded with Windows patches. This brought the entire system down, so I removed the patches. Now we are up and running. However, we do not have access to the Admin page. I checked to see if it might be caused by the absence of one or more services running, but all Cisco services are running. Not only that, but can't access BAT or the user pages either. Any ideas?

7 REPLIES
Bronze

Re: CCM Admin Web page "Page cannot be displayed"

Check to see if your IIS and World Wide Web Publishing services are running. If they are try restarting them.

New Member

Re: CCM Admin Web page "Page cannot be displayed"

That did not seem to work

Re: CCM Admin Web page "Page cannot be displayed"

Please try again restarting (even more than one time) the IIS and the WWW, is definitely a problem with those services, if that doesn't work try rebooting the server.

Bronze

Re: CCM Admin Web page "Page cannot be displayed"

Also have you tryied browsing with the callmanager IP address instead of name? Just to rule out a possible DNS issue. or even https://localhost/ccmadmin

New Member

Re: CCM Admin Web page "Page cannot be displayed"

I am having the exact issue after building a new Callmanager cluster. The cluster is running OS 2000.4.2SR2, CCM 4.1(3)SR2, and MS hotfixes MS06-001 & MS06-002. Strangely enough, the subscriber with the same build works fine.

New Member

Re: CCM Admin Web page "Page cannot be displayed"

My issue is now resolved. The issue was with the HTTPS SSL certificate. For some reason the self signed certificate (httpscert.cer) was not installed, though the IIS websites were configured to use it. I deleted the certificate in IIS, reinstalled the certificate and then enabled SSL again.

The link below has the process for deleting the certificate and enabling SSL.

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/sec_vir/ae/sec412/secutrbl.htm#wp1071673

New Member

Re: CCM Admin Web page "Page cannot be displayed"

Hi,

I have the same issue with a cluster of two Servers (Publisher and Suscriber) v 4.2(3)sr1

Sometimes in the Publisher I can not access to admin web page, I manually restart the IIS and WWW services but do not restart correctly, and the state is stopping or restarting.

And I must restart all the server.

1134
Views
0
Helpful
7
Replies
CreatePlease to create content