We are converting from an Avaya G3si to CCM 4.1(3), and are attempting to move a T1 connection to a Mitel SX-2000. Evidently, the T1 is built as AMI-D4, which I have set up on the gateway page (gateway is MGCP).
We tried to move the cable from Avaya to Cisco 3825 gateway and got no CD. Any idea what the pinouts need to be on this?
The Mitel SX-2000 phone system communicates with the Cisco Unity server by using DTMF sequences. The voice messaging lines from the phone system connect to the analog voice cards in the Cisco Unity server. Refer URL
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.