cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
430
Views
5
Helpful
5
Replies

ccm-manager command in IOS

pypkin90041
Level 1
Level 1

I have router 1751-V with c1700-ipvoice-mz.123-10 IOS version.

But it don't recognize command 'ccm-manager'

Which feature contains this command?

It shall help me to choose IOS version.

1 Accepted Solution

Accepted Solutions

islam.kamal
Level 10
Level 10

Hi

 

use http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

1- Select Research software 

2- Follow the attached file .

3- you will get all commands .

Thanks

please rate all useful information

View solution in original post

5 Replies 5

Jaime Valencia
Cisco Employee
Cisco Employee

Use the feature navigator for this, it will provide all the valid options based on what you're looking for

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

HTH

java

if this helps, please rate

I know about this navigator.

So I asked which feature I must chose there to have this command

Hi,

There's another link which is very helpful and is different from cisco navigator feature.
It shows the suggested release for any specific feature with respect to a device

https://software.cisco.com/selection/research.html#?mode=&tid=F&pidl=&sidl=&crl=&crtl=&fidl=&pidr=&sidr=&crr=&crtr=&fidr=

 

Regards
Aateek Singh
Network Engineer
Spooster IT Services

islam.kamal
Level 10
Level 10

Hi

 

use http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

1- Select Research software 

2- Follow the attached file .

3- you will get all commands .

Thanks

please rate all useful information

pypkin90041
Level 1
Level 1

I found an answer

This feature calls 'MGCP support for CallManager (IP-PBX)'

Thank all.

Question closed

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: