Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ccm-manager command in IOS

I have router 1751-V with c1700-ipvoice-mz.123-10 IOS version.

But it don't recognize command 'ccm-manager'

Which feature contains this command?

It shall help me to choose IOS version.

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions

Hi use http://tools.cisco.com

Hi

 

use http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

1- Select Research software 

2- Follow the attached file .

3- you will get all commands .

Thanks

please rate all useful information

5 REPLIES
Cisco Employee

Use the feature navigator for

Use the feature navigator for this, it will provide all the valid options based on what you're looking for

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

I know about this navigator

I know about this navigator.

So I asked which feature I must chose there to have this command

Hi,There's another link which

Hi,

There's another link which is very helpful and is different from cisco navigator feature.
It shows the suggested release for any specific feature with respect to a device

https://software.cisco.com/selection/research.html#?mode=&tid=F&pidl=&sidl=&crl=&crtl=&fidl=&pidr=&sidr=&crr=&crtr=&fidr=

 

Regards
Aateek Singh
Network Engineer
Spooster IT Services

Hi use http://tools.cisco.com

Hi

 

use http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

1- Select Research software 

2- Follow the attached file .

3- you will get all commands .

Thanks

please rate all useful information

New Member

I found an answerThis feature

I found an answer

This feature calls 'MGCP support for CallManager (IP-PBX)'

Thank all.

Question closed

 

69
Views
5
Helpful
5
Replies
CreatePlease to create content