Nov 29 11:19:07.280: cmapp_open_new_link: Open link for :10.108.0.11
Nov 29 11:19:07.280: cmbh_open_tcp_link: Opening TCP link with Rem IP 10.108.0.11, Local IP 10.108.0.252, port 2428
Nov 29 11:19:07.280: cmapp_open_new_link: Open initiated OK: Host 0 (10.108.0.11), session_id=46556204
Nov 29 11:19:07.280: cmapp_host_fsm: New state STANDBY_OPENING for host 0 (10.108.0.11)
Nov 29 11:19:07.280: cmapp_host_fsm: Processing event GO_ACTIVE for host 1 (10.108.0.10) in state STANDBY_READY
Nov 29 11:19:07.280: cmapp_mgr_send_rehome: new addr=10.108.0.10,port=2427
Nov 29 11:19:07.280: cmapp_host_fsm: New state REGISTERING for host 1 (10.108.0.10)
The switch is not congested so there is no reason for the keepalives to not arrive. I have configured the ports and NICs for 100M full duplex. There are no errors on the switch ports and no errors in the ccm event logs.
Please help. Thanks.
Both callmanagers and both gateways are in the same vlan on the same switch.
Re: CCM MGCP Gateway Fails Over Several Times a Day
I removed the ccm-manager config statement. I already had bind configured to my g0/1 interface. Would configuring bind to a loopback instead of the gig int really make a difference regarding lost keepalives?
I have both cccms and both gateways on the same 3550 switch in the same vlan. I have auto-qos enabled.
The interfaces on the switch are showing no lost packets or errors. CPU and bandwidth utilization on the switch is fine. The ccms don't show any issues in the event logs. It almost seems like the CCMs are not sending the keepalives when they should.
Is there a way to change timers so that mgcp waits longer than 30 seconds to failover?
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...