09-14-2008 09:43 PM - edited 03-13-2019 05:39 PM
Hello
I have ccm 5 and outside branch works in the g729 codec i need configure transcoding but then i try configure transcoding like in the documnetation
i see only ccm 4.1
scc ccm 192.168.22.20 identifier 1 version but my ver sion is 5.1
so how configure transcoding for ccm 5
09-15-2008 05:15 AM
follow this link config
just make sure u have put the right ccm verion
and setting on both router and ccm similer if not identical :)
good luck
if helpful Rate
09-15-2008 05:51 AM
hello thank you for your response but in the voice gateway haven't ccm5 version
only 4.1
09-15-2008 07:38 AM
Hi, Upgrade your GW IOS to 12.4(15)T7
09-15-2008 09:43 AM
if you don't have it simply try dropping the version command, many times that does the trick without doing an IOS upgrade
HTH
java
if this helps, please rate
10-08-2008 05:06 AM
i manage to use "version 4.1" with cucm 6.1
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: