Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CCME Express with Unity 2.4.6

Will Callmanager Express work with a Unity 2.4.6 voicemail?

If so... How would I set it up? Would I configure Unity to connect to the Callmanager Express (As if it was a full blown Callmanager)?

And How would I set up CCME to connect to Unity 2.4.6?

Thanks Again for your help.

7 REPLIES
New Member

Re: CCME Express with Unity 2.4.6

This is a supported config. Check out the system configuration manual at

http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps5012/products_feature_guide_book09186a00801812e4.html

You will need pasword access.

Sarat

New Member

Re: CCME Express with Unity 2.4.6

Config only show Unity 4.0

What about 2.4.6 or 3.0???

Thanks Again

Cisco Employee

Re: CCME Express with Unity 2.4.6

CME isn't going to care, neither is Unity. You just have to configure Unity the same way as if it were connecting to a regular CallManager.

New Member

Re: CCME Express with Unity 2.4.6

Thanks Alot, I will give it try.

New Member

Re: CCME Express with Unity 2.4.6

I tried it, and it doesn't seem to work.

Unity 2.4.6 Registers then unregisters.

I do a show ephone and the unity ports show up as deceased.

Any ideas

Gold

Re: CCME Express with Unity 2.4.6

Which version of TSP are you running on Unity?

New Member

Re: CCME Express with Unity 2.4.6

I'm off site now... But its the one that came on the 2.4.6 CD.

How can I get the lastest? My CCO account does not have download capabilities.

Thanks.

Dan

112
Views
0
Helpful
7
Replies