CCME Express with Unity 2.4.6

danm · ‎02-01-2004

Will Callmanager Express work with a Unity 2.4.6 voicemail?

If so... How would I set it up? Would I configure Unity to connect to the Callmanager Express (As if it was a full blown Callmanager)?

And How would I set up CCME to connect to Unity 2.4.6?

Thanks Again for your help.

skhilnan · ‎02-01-2004

This is a supported config. Check out the system configuration manual at

You will need pasword access.

Sarat

danm · ‎02-01-2004

Config only show Unity 4.0

What about 2.4.6 or 3.0???

Thanks Again

Markus Schneider · ‎02-02-2004

CME isn't going to care, neither is Unity. You just have to configure Unity the same way as if it were connecting to a regular CallManager.

danm · ‎02-02-2004

Thanks Alot, I will give it try.

danm · ‎02-05-2004

I tried it, and it doesn't seem to work.

Unity 2.4.6 Registers then unregisters.

I do a show ephone and the unity ports show up as deceased.

Any ideas

kechambe · ‎02-05-2004

Which version of TSP are you running on Unity?

danm · ‎02-06-2004

I'm off site now... But its the one that came on the 2.4.6 CD.

How can I get the lastest? My CCO account does not have download capabilities.

Thanks.

Dan