HI, Aaron, I'm with a situation where I need to write a script to the IPCC so it can open the MeetMe by itself.
The idea is someone to be answared by the IVR and the IVR open up the MeetMe. The problem is that somene from outside the company obviusly doesn't have the "MeetMe" button in the cell phone for example. So I would like somebody from outside to be able to opem up the conference room.
The solution for that I figured out would be the IVR to send the MeetMe command to the Call Manager. Is that possible? Do you have a sample script for that?
No - the MeetMe key is an SCCP softkey; so to have IPCC press that you'd presumably have to emulate or remotely control an SCCP endpoint. Emulating one would be very complex and difficult, and remotely controlling one would probably be quite unreliable...
What the previous post referred to is a scenario with CME/CUE which is completely different.
Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...