Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
453
Views
0
Helpful
8
Replies

CCME Solution Needed

Brian Carscadden
Level 5
Level 5

‎10-03-2007 05:23 AM - edited ‎03-13-2019 04:29 PM

(REPOSTED FROM IP TELEPHONY FORUM)

CCME 4.0, CUE 2.3.4

We have the need for the following:

A CEO/Road Warrior has his admin at HQ arrange conference calls. She does an ad-hoc conference to bring in third-parties, then puts herself on hold or mute and continues with her work while the CEO discusses world domination ;-) with the third party. When the conference call is over the third party drops, but the CEO stays on and wants the admin (who's on hold or muted) to somehow be notified that she can resume talking and presumably arrange subsequent conferences. Apparently this "notification after conference completion" was a feature in their past phone system, but is not available in CCME. Anyone with an idea, please respond.

Thanks and regards,

Brian Carscadden

TransNet Corporation

908-296-0452

Labels:
0 Helpful
8 Replies 8

msabir
Level 4
Level 4

‎10-03-2007 09:49 AM

One work around is to have a "pre-typed" text message pushed out to admin lady, along with a ringer to get her attention. CEO can push out this message using a speed dial button. In this case speed dial will be used as a service URL.

You might be able to do this using PhoneTop Messenger. This product allows sending text and audio message to IP phone groups. You can also send out a pre-typed text message from an IP phone.

Is is for CCM express or regular CCM?

0 Helpful

Brian Carscadden
Level 5
Level 5
In response to msabir

‎10-03-2007 09:54 AM

Sorry, CCME 4.0, CUE 2.3.4

Problem is the CEO is dialing in from the road (hence "Road Warrior") via his cell phone. Is there a DTMF option to generate the notification?

0 Helpful

msabir
Level 4
Level 4
In response to Brian Carscadden

‎10-03-2007 09:59 AM

Using JTAPI, you can see events from CCM and then you can program the system to send out a text message to a predefined phone group when certain event is detected.

One possibility is to look for number of connections on that conference call. When the connections drop to "1" (admin phone is the only one left), push text to admin phone.

I am not sure if you can capture DTMF from JTAPI. That may be a way to go.

Sounds like this will be a small custom application.

0 Helpful

msabir
Level 4
Level 4
In response to Brian Carscadden

‎10-03-2007 10:05 AM

Looks like you can detect DTMF digits using JTAPI, using getDtmfDigit method.

So this custom application has to sit there and wait for certain DTMF sequence, and then push out a text message with ringer to admin phone.

0 Helpful

Brian Carscadden
Level 5
Level 5
In response to msabir

‎10-03-2007 10:22 AM

Sounds promising. Can you contact me to discuss a potential consulting offer? (contact info below) It's a small app, but it's something we'd like to have.

Brian Carscadden

carscadden@transnet.com

TransNet Corporation

908-296-0452

0 Helpful

ckatene
Level 3
Level 3
In response to Brian Carscadden

‎10-03-2007 02:25 PM

Does CCME support JTAPI? It didn't the last time I looked ...

0 Helpful

msabir
Level 4
Level 4
In response to ckatene

‎10-04-2007 05:45 AM

No, CCME still does not support JTAPI :(

The other alternate is to use SIP. It appears that folks are able to read DTMF on CME 3.3 running SIP.

0 Helpful

Brian Carscadden
Level 5
Level 5
In response to msabir

‎10-04-2007 06:35 AM

Our basic requirement is only to send notification to a specific DN when the # of conference participants (that includes a specific DN) drops to 2.

0 Helpful
Customers Also Viewed These Support Documents