I am attempting to create CDR records from both my subscriber and publisher. The Calls that originate via the publisher work just fine, however no calls via the subscriber are hitting the CDR database at all. When I look at the servicability/control center I see "Cisco CDR Insert - Unspecified Error" wih a "?" for the status for the subscriber server. I cannot find any other indication of what the cause of this is.
Are you sure that the replication between the two servers is working properly? Make a change on the publisher, then web over to the subscriber and see if it has the change. If not, you might need to re-create the relationship in SQL, which is outlined here:
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...