12-09-2005 10:53 AM - edited 03-13-2019 11:31 AM
Has anyone had any experience or have any documentation about have a centralized CM deployment with an additial subscriber at a remote location (All part of one cluster???
Thanks!!!
12-09-2005 01:59 PM
Check out the CallManager SRND documet at www.cisc.com/go/srnd. Make sure that the delay beetween sites where CCM reside is no more than 40 ms.
Chris
12-09-2005 08:40 PM
Sorry but this is a broken link!!!
12-10-2005 07:51 AM
Sorry, I included the . in the link try www.cisco.com/go/srnd
Chris
12-10-2005 08:24 AM
THanks for the docs. Has anyone done this and if so any advice or things to lookout for?
12-10-2005 09:17 AM
Chris already answered your question. Make sure RTT is very small, < 40 ms. Try not to be at the upper limit of 40 ms either.
I have done this with one of my customers, and they had a gigaman link between the two sites with RTT of <2ms. We have so far never run into any issues.
HTH
PS: please remember to rate helpful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide