Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CFwdAll on Second (2nd) Line

Scenario: A user has a 7960 phone with 6 different lines.

Question: How can you forward all calls (cfwdall) on line 1 to extension 4444?

Answer: Press CFwdAll softkey, wait for two beeps, dial 4444.

Question: How can you cfwdall on line 2 to extension 5555?

Answer: __________________________?

Thank you for any insight, Tim

3 REPLIES
New Member

Re: CFwdAll on Second (2nd) Line

If you are a user you can go the Cisco CallManager User Options webpage. Ip address or hostname of the call manager box /ccmuser.(EX:192.168.185.10/ccmuser) From there you can forward calls for each line a IP phone has.

Jeremy Land

New Member

Re: CFwdAll on Second (2nd) Line

I realize that all lines may use the CCMUser webpage to forward all calls, but is there a way to do it from the phone itself? If not, does this need to be recommended through the proper contacts? Currently we're using CallManager 3.1.4b with phone load P00303010413.

Thank you,

Tim

New Member

Re: CFwdAll on Second (2nd) Line

Tim,

CFA is only supported on the phone for the primary line - as already stated, the admin/user web-page is the only work around at this time.

I know this has been asked for - but it won't do you any harm to raise it with your Cisco account team.

Regards,

Justin

203
Views
0
Helpful
3
Replies