Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CG200 MGCP gateway and CCM 3.1(3) DID

how do you configure Callmanager 3.1(3) to support DID using VG200 PRI interface?

Thanks!

Chris

1 REPLY
Cisco Employee

Re: CG200 MGCP gateway and CCM 3.1(3) DID

You have two options you can use 12.2(2)xn and do mgcp that is explained in the link below.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122limit/122x/122xn/122xn2/ft_ccm.htm

Or you can do h.323 which is explain in the line below.

http://www.cisco.com/warp/public/788/AVVID/config_h323_ccm.html

The advantage of using MGCP is the gateway will failover to a secondary callmanager of the primary goes down and the calls will be preserved. With h.323 the calls will be dropped.

Hope this helps,

-Mckee

159
Views
0
Helpful
1
Replies
CreatePlease to create content