Change T302 Timer!!!

[jolo07310]

I have CCM 4.13sr3c lab (Publisher and Subscriber).

The default T302 Timer is 15000, try to change to 4000. It works after I press the digit, it busy out after 4 sec.

However, if I get out the "service parmeter", then get back in again... it change back 15000.

It is not just T302 timer, I tried to change "auot answer Timer" from 1 to 5. It will change back to 5 once I left the webpage.

Any ideas...

Ken

[pepito1983]

Are the Publisher and Subscriber on the same LAN? How are you begining a web session with the callmanager https:///ccmadmin or https:///ccmadmin?

Pepe

[jolo07310]

Publisher and Subscriber are on the same vlan.

I use https:///ccmadmin to access web page.

Thanks

[thisisshanky]

Ken,

Are you trying to update this through web interface from a browser on your PC or on the server itself ?

Any thing wrong with the browser (Do you see any a yellow exclamation mark ) at the bottom when you click update on service parameters page ?

[jolo07310]

I am trying to update web interface on the server itself.

I did not notice any yellow exclamation mark, but I will check tonight...

So what if I saw yellow exclamation mark?? how to fix it??

Ken

[pepito1983]

Hi please enter the callmanager web page by using https:///ccmadmin and trie to do the changes. Don't forget to update the changes.

Good Luck,

Pepe

[jolo07310]

Tried at lab last night....

It doest matter you log as CCM name or IP address.

For instance:

you change T302 from 15000 to 4000, then u get out "service parameter", go somewhere like "Device-->Gateway", then go back to "Service Parameter", the number change back to 15000. However, when u test the interdigit timeouts, it is 4000msec.

Then you close the webpage, login again, the number will be 4000msec.

It is weird, but I can live like that...

Thanks for help.

Ken

[marklandry]

Clear the browser Temp Internet files Cookies and History files then close and re-open the browser. Chances are the settings for the browser are using the stored web page instead of pulling one from the server.