Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Bronze

Change T302 Timer!!!

I have CCM 4.13sr3c lab (Publisher and Subscriber).

The default T302 Timer is 15000, try to change to 4000. It works after I press the digit, it busy out after 4 sec.

However, if I get out the "service parmeter", then get back in again... it change back 15000.

It is not just T302 timer, I tried to change "auot answer Timer" from 1 to 5. It will change back to 5 once I left the webpage.

Any ideas...

Ken

7 REPLIES
New Member

Re: Change T302 Timer!!!

Are the Publisher and Subscriber on the same LAN? How are you begining a web session with the callmanager https:///ccmadmin or https:///ccmadmin?

Pepe

Bronze

Re: Change T302 Timer!!!

Publisher and Subscriber are on the same vlan.

I use https:///ccmadmin to access web page.

Thanks

Re: Change T302 Timer!!!

Ken,

Are you trying to update this through web interface from a browser on your PC or on the server itself ?

Any thing wrong with the browser (Do you see any a yellow exclamation mark ) at the bottom when you click update on service parameters page ?

Bronze

Re: Change T302 Timer!!!

I am trying to update web interface on the server itself.

I did not notice any yellow exclamation mark, but I will check tonight...

So what if I saw yellow exclamation mark?? how to fix it??

Ken

New Member

Re: Change T302 Timer!!!

Hi please enter the callmanager web page by using https:///ccmadmin and trie to do the changes. Don't forget to update the changes.

Good Luck,

Pepe

Bronze

Re: Change T302 Timer!!!

Tried at lab last night....

It doest matter you log as CCM name or IP address.

For instance:

you change T302 from 15000 to 4000, then u get out "service parameter", go somewhere like "Device-->Gateway", then go back to "Service Parameter", the number change back to 15000. However, when u test the interdigit timeouts, it is 4000msec.

Then you close the webpage, login again, the number will be 4000msec.

It is weird, but I can live like that...

Thanks for help.

Ken

New Member

Re: Change T302 Timer!!!

Clear the browser Temp Internet files Cookies and History files then close and re-open the browser. Chances are the settings for the browser are using the stored web page instead of pulling one from the server.

370
Views
6
Helpful
7
Replies