Change the Caller ID information of an incoming PSTN Call
I am geting ready to purchase a Call Manager Solution. I have 4 operating companies that work out of the same office, infact they are the same people staffing each company. I want to get a T1 wor the voice that comes from the pstn I am assuming if I have a DID number from the PSTN for each company CM will see both the ID information for the outside caller and the number they called in on. what I would like to do is tag the caller ID information With the name of the company inside employees should answer the phone with, "thank you for company 1". I know I can put multiple DNs on a phone and route the DID to the DN so it works like the Key system we have now but having something on the screen like CO1 - Name of the Customer who called - Customer's Phone number would just be cool. Is there a way to accomplish this with a transform?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...