Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Changing Partern Exchange Server for Unity

Wondering if anyone has had experience with this:

We need to shut down our old 2003 Exchange box and use our Exchange 2007 box exclusively. The issue is our Unity 7 box is using our 2003 Exchange as it's partner server and need to change it to our 2007 box instead.

I've read some documentation on it, but can't find anything specific to our versions listed previously and just wondering if there are any gotchas involved or if this is fairly straight forward.

Any steps you've followed to be successful would be greatly appreciated. Thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Changing Partern Exchange Server for Unity

Unity 7.x documentation is the same as Unity 5.x - there is no specific 7.x documentation.  The 2 versions are so close that they are interchangeable from a setup/reconfiguration perspective.  Check this link here for info:

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/upgrade/guide/ex/5xcuruge050.html

Hailey

Please rate helpful posts!

2 REPLIES

Re: Changing Partern Exchange Server for Unity

Unity 7.x documentation is the same as Unity 5.x - there is no specific 7.x documentation.  The 2 versions are so close that they are interchangeable from a setup/reconfiguration perspective.  Check this link here for info:

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/upgrade/guide/ex/5xcuruge050.html

Hailey

Please rate helpful posts!

New Member

Re: Changing Partern Exchange Server for Unity

OK, thanks Hailey.

230
Views
0
Helpful
2
Replies