check calling number to determine dial-peer rule.

[shawn-chen]

I have T1/PRI can be dial in/out.

when I dial in,I can use debug mode at my as5300.

can show my telephone number,

can I check my telephone number to determine my as5300 dial-peer rule.

what's mean about this command

"calling-number outbound sequence"

can I use this command ..

[mimckee]

To my knowledge there is not a way to route the call based on the calling party. I work more with 26xx/36xx and Call Manager than I do with the 5300, but I did not see anyone answer your questions.

Thank you,

-Mckee

[bcowley]

If you are using CallManager, you can always use partitions and route lists to accomplish this.

[shawn-chen]

How can I do this command at my CCM.

I want to use AS5300 to another AS5300.

because I want use from AS5300 dial in, another AS5300 dial out.

When Call setup, we can check call setup/alert/connect parameter value, we can check it to choose specify route.

so Have somebody can help me to use.

[pchepurthy]

Hi,

Try to use answer-address feature. It will solve ur purpose. Also go thru the following site. It is useful...

http://www.cisco.com/warp/public/788/voip/in_dial_peer_match.html

pchepurthy

[shawn-chen]

thanks your suggest.

but I had tried about command for answer-address before,

but no any help.