Does anyone have experience integrating CallManager with Nortel's CallPilot unified messaging system. Is it feasible? If so, what are the noted caveats? Seem to be having trouble locating any documentation on this. Any help is greatly appreciated.
The only integration is SMDI, which involves an async serial cable between the COM ports of the two systems.
I don't know if this is just rumor/hearsay, but at one point I remember hearing that CallPilot stopped supporting integrations with CallManager. I don't know if that means they stopped supporting all SMDI connections, or just ones to CallManager.
Not trying to spread bad information, I just wanted to mention this.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...