I have a cisco CWSIME-1160-K9 server, trying to install a new 73G scsi hard drive, I'm having a hard time setting it up, as far I know everything seems to be in the right order, but for some reason when I go to install the OS it keeps telling me can't find the hard drive.
what could be wrong?
where can I find some information about this product online.
When you boot up, does your controller see your new drives? First, you have to make sure, that everything works at the controller level. Not sure about this particular platform, but most HP servers have a special service partition, which allows you to build RAID, do controller setup, etc.
Second question - what are you trying to install? Is it a standard Windows 2000 installation, or you're trying to install Cisco OS image? If it's just Windows, then you should look at the controller (most likely it will be LSI Logic Ultra320 SCSI) for particular model number, and just Google for a drivers. Then, during CD-ROM bootup, press F6 when prompted, and install the controller drivers from a floppy.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...