Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

cisco 2811

is there any published cisco documents that details the number of Simultaneous call set up requests a cisco 2811 can handele any any one time down an e1 pipe, for example , if 15 call set up requests come down the line to the GW (which is MGCP) can the GW handle these and what are the response times?

Thanks

2 REPLIES
Blue

Re: cisco 2811

the 2811 can theoretically handle:

maximum calls per second: 1

maximum VoIP calls: 80

see the following link for more info:

http://www.cisco.com/en/US/products/sw/custcosw/ps1006/products_implementation_design_guide_chapter09186a008063ea16.html

Hall of Fame Super Red

Re: cisco 2811

Hi Dave,

Have a look at this doc that shows performance test results for all of the 2800 series ISR. Maybe this will help;

Test Results

The tests reported in this document were designed to stress-test the Cisco CME and the appropriate Cisco 2800 and 3800 Series Integrated Services Routers. Showing how many Busy Hour Call Completions (BHCC) with a full load of data were introduced into the router and how the router performed.

Test results with the Cisco CME on the Cisco 2811 Integrated Services Router

Testing 24-User Office

Cisco CME — configured for 24 IP phones

24 IP phones

Tested

Pass

Simultaneous call setup/teardown

24 IP phones (1044 BHCC)

Tested

Pass

Cisco Unity Express — configured with 24 mailboxes

24 mailboxes

Tested

Pass

Simultaneous voice mail and retrieval

4 connections

Tested

Pass

Incoming/outgoing PSTN calls

Tested

Pass

Fax — T.38

Tested

Pass

Cisco Business Communications Solution Verified Designs (Test Results Ver. 4)

Performance Test Cases

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_installation_guide_chapter09186a008054bc93.html#wp1017779

Hope this helps!

Rob

Please remember to rate helpful posts.....

222
Views
5
Helpful
2
Replies
CreatePlease to create content