Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

cisco 2950 switch

hi,

i've been new to the networking industries, i have an ip phone 7912G connected to Lan and PC but the end user get mad because there connection are to slow. IP Phones are connected to 2950 switch.

hope anyone will help me,

Regard's,

Gio

2 REPLIES
Super Bronze

Re: cisco 2950 switch

Hi

What settings do you have on your switch port, and on the PC NIC? They should all be auto speed & duplex, if not the connection will fall back to a lower speed if it's not set properly.

Check your switch port (show int fa 0/0 for example) to see what settings have been negotiated - also are there any errors listed?

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

Re: cisco 2950 switch

Gio,

Use the following document to configure Pc and Ipphones with 2950 switch ,let me know if this helps

http://www.cisco.com/en/US/products/hw/switches/ps4916/products_configuration_guide_chapter09186a008017e533.html

89
Views
0
Helpful
2
Replies