Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 3660 with E1-PRI as MGCP Gateway

I Have a router 3660 with a E1-PRI card, IOS 12.2(2)T1, CallManager 3.1(1).

I have configured the router as MGCP Voice Gateway both on the router both on CallManager.

From CM I can see the E1-PRI card registered, but when i try to make a call to the outside or receive a call from the outside, I can see (on the router) that there is no connection between the two.

Does anyone know if it's a configuration problem or IOS version problem?

Thanks

2 REPLIES
Cisco Employee

Re: Cisco 3660 with E1-PRI as MGCP Gateway

The version of code you are using on the 3660 does not support mgcp pri with the call manager. The code that you need is 12.2(2)XN. I think it is suppose to be out by the end of October.

Thank you,

New Member

Re: Cisco 3660 with E1-PRI as MGCP Gateway

Many thanks for your help.

I will wait for this version.

many thanks

133
Views
0
Helpful
2
Replies