Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco 3745 to CallManager without MGCP

Hello,

I have 2 PRI in spain and I try to configure my router to connect to Callmanager.

3745 with NM-HDV-2E1-60

IOS : c3745-advipservicesk9-mz.123-8.T5.bin

When I try to connect on one of the 2 PRI, the router doesn't relay to callmanager.

I attached the config and the debug...

I have two other questions, can I use on the same router, toi connect to :

a sip server, a gatekeeper and a callmanager?

Thanks, Regards

3 REPLIES
Bronze

Re: Cisco 3745 to CallManager without MGCP

You make the router as H.323 gateway and connect to the CallManager.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080094636.shtml

New Member

Re: Cisco 3745 to CallManager without MGCP

Thank you for your answers.

Re: Cisco 3745 to CallManager without MGCP

Is your ip phones having full 8 digits configured as DN ? Try to match the dial-peer for voip in the router configuration, as ........ (8 dots) rather than T and see if that helps!

211
Views
0
Helpful
3
Replies
作成コンテンツを作成するには してください