Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 3845 SIP gateway with ISDN NET-5 trunk


Please help

I have a Cisco 3845 version c3845-spservicesk9-mz.124-10.bin connected to a suppliers Cisco Voice gateway controlled by a CALL MANAGER


Making a call over the SIP gateway to the ISDN Cisco Voice gateway(3845) integtrated(cross over ISDN cable ) with a ISDN Cisco Gateway on a Call MANGER.

Problem is there is no ringback to the Calling side but I am get a ALERTING message "RINGBACK." on the ISDN level

048888: *Feb  9 20:14:54.765 SAST: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8  callref = 0x8EE0
        Channel ID i = 0xA98381
                Exclusive, Channel 1
048889: *Feb  9 20:14:54.881 SAST: ISDN Se0/0/0:15 Q931: RX <- ALERTING pd = 8  callref = 0x8EE0

and now I am send this back to my SIP PEER aswell

048895: *Feb  9 20:15:57.265 SAST: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
SIP/2.0 183 Session Progress
Via: SIP/2.0/UDP;branch=z9hG4bK831p6d10185glk4b36k0.1

... THE call does complete .. Only NO Ringback.

Any assittance welcome.

I did come accross a CISCO artical not to use Voice class codec  but I must use g729br8  else Vad are enable and calls If I don't use class codec this is what I get

048919: *Feb  9 20:20:32.221 SAST: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
SIP/2.0 488 Not Acceptable Media

Thank you

Everyone's tags (1)
Hall of Fame Super Gold

Re: Cisco 3845 SIP gateway with ISDN NET-5 trunk

New Member

Re: Cisco 3845 SIP gateway with ISDN NET-5 trunk

Hi p.bevilacqua

Thank you for this info  I actually tried all those options aswell but still no luck.. could it be a IOS or DSP  issue ?
in The meantime I have forwarded this link on to the 3rd partyCisco (Call manager) provider aswell.