I have an environment with Cisco 5.0 which is partnering with Exchange 2007. Then I followed the guide to partner the Unity 5 into Exchange 2010. I have upgraded the ES to the suitable version which related to Cisco 5. I have also installed the Cisco certified Microsoft ServerUpdate patches. I also update the latest version of Permission wizards. I also installed the Exchange MAPICDO which is downloaded from Microsoft (as suggested by the Upgrade guide).
Everything is installed successfully. But when we try to leave the voice message into the Unity server, the voice mail cannot be sent to the end users. I checked that the message ( 1 wav file and 1 txt file) are stuck in the \CommServer\UnityMTA folder.
There are a few error message logged in the Windows Application event viewer.
Event ID 29021, 30003, 30012, 32013 and 137 which saying that "AvUMRSyncSvr will suspend message delivery for 300 seconds, after which message delivery will be attempted again. During this outage, messages may accumlate in the temporary store. 0x0000161C
May I know what else steps I have missed during the upgrade / re-partnering process?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...