Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 7960 (SIP) does not register

Hello,

just for some testing, I had two cisco 7960 IP phones attached to CME 4.0 using SCCP and everything worked fine, was able to make call between the two and also making calls to other CME phones. Then, I converted those phones to SIP according to procedures defined on Cisco's manual - Cisco Unified CME Configuration Guide for SIP IP Phones. Conversion was successful. Each IP phone gets its own data as they display on the screen their number, label, name, time and data formats as defined through CLI. However they don't communicate.

The command "show voice register statistics" displays 0 active registrations and command "debug voice register errors" VOICE_REG_POOL:contact doesn't match any pools.

Any suggestions on this issue?

Thank you very much,

Pedro

147
Views
0
Helpful
0
Replies